kompact is a simple solenoid dosing pump, operating with a micro-processor to manage the dosing. It's external enclosure has an IP55, which guarantees a protection versus splashing water and aggressive environments. Kompact pump has a LED, which shows the state of the operation, according the dosing regulation, constant C or proportional P:

Operation state LED:

• Steady green LED switches off with every stroke that the pump runs.
• Flashing Green led with the potentiometer to 0.
• Steady red LED switches on with alarm.

In  proportional mode

• Steady orange LED switches off withevery stroke that the pump runs.
• Flashing orange LED with the potentiometer at 0.

MODELS

AMS (constant dosage) - Constant flow rate manually adjustable by control dial on the front panel, Power-ON led indicator.

AML (constant dosage) - Constant flow rate manually adjustable by control dial on the front panel, two flow rate range:
• 0÷20% with switch in P position,
• 0÷100% with switch in C position,
Power-ON led indicator and level control input.

AMM (proportional dosage) - Constant flow rate manually adjustable, proportional flow rate according to an external analogue signal (4÷20 mA), Power-ON led indicator and level control input.
The two different modes are:
n Constant (switch in C position) - The pump constantly doses the rate selected with the potentiometer.
n Proportional (switch in P position) - The pump doses proportionally to the analogue input signal (4÷20 mA).

AMC (proportional dosage) - Constant flow rate manually adjustable, proportional flow rate according to a digital input signal (from water meter), Power-ON led indicator and level control input.
The two different modes are:
n Constant (switch in C position) The pump constantly doses the rate selected with the potentiometer.
n Proportional (switch in P position) The pump doses proportionally to the digital input signal
(Division mode 4 : 1). Maximum input frequency: 80Hz.

Features 

  pint Invikta e Kompact pumps