RO 60 EL-TS demineralizer for laboratory and industry
 |
Applications
| BASE VERSION Feeding of glass items washers Feeding of steam generators Feeding of thermostatic baths Feeding of ultra-pure water systems Autoclaves, boilers in general INDUSTRIAL USES |
demi VERSION Generalised laboratory uses Glass works rinsing Reagents preparation/dilution Colorimetric and qualitative analyses Feeding of thermostatic baths INDUSTRIAL USES |
demi2-TS VERSION HPLC chromatography Reagents preparation/dilution Colorimetric and qualitative analyses Spectro-phot. Analysis atomic absorption INDUSTRIAL USES As described for the DEMI version |
| quality standard | quality standard | quality standard |
|
purified water (usually El. Spec. Conductivity < 5-20 mcrS/cm) produced only with reverse osmosis system |
Conform ISO 3696: grade 3 Conform ASTM: type 4 Conform NCCLS: type 3 El. Spec. conduct. 25°C: 0.2-3 mcrS/cm El. Spec. resist. 25°C: 5 MOhm.cm |
Conform ISO 3696: grade 2 Conform ASTM: type 2 Conform NCCLS: type 2 El. Spec. conduct. 25°C: 0.1-1 mcrS/cm El. Spec. resist. 25°C: 10 MOhm.cm |
Quality, technology, versatility
The demineralizer RO 60 is designed to produce deionized water of high purity, for technical uses. The deionized water production costs are reduced by up to 50% compared to normal deionizers resin, thanks to the use of reverse osmosis membranes with high salt rejection of high quality (> 99%, operating pressure 14-16 bar). All devices are mounted on stainless steel frame and on request can be paneled. The water obtained can be considered excellent not only in the salt but also in terms the organic aspect.
RO 60 can adapt to the needs of the user purity, thanks to 3 versions with different degrees of purity and the ability to adjust at will the conductivity output (optional).
RO 60 is operated by an electronic control unit realized in container IP 65, interfaced with the PLC technology with the PC it is for the sequence for the self-diagnosis of the operating steps, and is able to directly control all the functions of: pump management overpressure and solenoid valve, alarm and machine shutdown for a minimum pressure in the network, on-line detection of the produced water conductivity (conductivity or resistivity choice in the TS-demi2 model) via the interface using a conductivity meter to read in digital operation and reading on line, alarm water quality, possibility of manual operation or management level in the storage tank 2 in floating (minimum and maximum level), or finally dosage to volume (optional).
OPERATIONAL CHARACTERISTICS OF THE ELECTRONIC CONTROL PANEL
- Direct management inputs: 2 floats (min and max)
start / stop manual, low pressure shutdown
start / stop manual, low pressure shutdown
- Direct management of the operating elements: solenoid valve inlet, booster pump and
(optional) flushing system programmable membrane
(optional) flushing system programmable membrane
- View messages and data on the LCD or touch screen
A visual signal shows the various types of alarm: quality water with the consequent need to change resins (in demi and demi 2 versions) or exhaustion membranes (in the basic version); cartridge needs replacing pre-filter sediment or post-filter 0.2 microns if any.
| TECHNICAL FEATURES | DIMENSIONS | |||
| - DAILY PRODUCTION | lt 600-800 | Lenght max | cm 53 | |
| - HOURLY PRODUCTION | lt/h 60 | Width max | cm 64 | |
| - Feed pressure | bar 2,5/4,5 | Height max | cm 137 | |
| - Temperature of water to be treated | °C 5-35 | |||
| - operative pressure RO elements | bar 14-15 |
|
||
| - hidraulic connection | IN: pipe PE 10/8 | |||
| OUT: pipe PE 6/4 | ||||
| DRAIN: pipe PE 6/4 | ||||
| - ELECTRIC POWER | V 220 AC | |||
| TECHINCAL SPECIFICATIONS WATER TO BE TREATED | |
| max permissible values | |
| - TDS | ppm 500 |
| - Total Hardness | °F 30 |
| - Iron | ppm 0,1 |
| - Manganese | ppm 0,005 |
| - Chlor | ppm 0,1 |
| - TDS | ppm 500 |
| - SDI | <5 |
| - Total bacteria | UFC/ml<5 |
|
It may still be necessary to dose liquid antiscal at the discretion of the manufacturer |
|
Optional Accessories
1 - Function Flow meter, managed directly by the PLC, to archieve precision fill. The external signal is provided by a pulse-counter teflon; starting the machine is in manual. The setting of the volume is easly adjustable with or without a pc.
2 - Storage tank in PE HD internal or external. with anti-dust system, whose water level is regulated by N°2 magnetic sensors, a maximum (block) and a minimum (restart production). Third sensor can be installed to indicate a level below the minimum due to il being accidental implantation.
print RO 60 EL-TS