Electromagnetic dosing pumps
Pulse-sender water meters
Threaded water meters
| TC1 Series | TH1 Series | TC0 Series |
| - Single-jet water meters with pulse sender - Dry dial - Roller reading - 4 or 1 pulse/l - Cold water up to 30 °C - Connections: from ½"(13mm) to 2” (50 mm) |
- Single-jet water meters with pulse sender - Dry dial - Roller reading - 4 or 1 pulse/l - Hot water up to 90 °C - Connections: from ½"(13mm) to 2” (50 mm) |
- Single-jet water meters without pulse sender - Dry or wet dial - Roller reading - Cold water up to 30 °C - Connections: from ½"(13 mm) to 2” (50 mm) |
Flanged water meters
| FC Series |
| - A high capacity helical vane (Woltmann) type water meter - Dry dial reading - Pulse sender - Cold water up to 50°C - Connections: from 2"(DN50) to 6” (DN 150) |
Tanks, mixers and suction devices
Tanks in polyethylene
Our tanks are designed to assemble dosing systems with mixers and motor driven pumps or solenoid dosing pumps. All are made from food-safe polyethylene, resistant to almost all chemicals normally encountered.
Material: Polyetylene HD
Color: White, blue
Arrangement for threaded drain hole: Ø 1/2" until 300 liters
Ø 1" for 500-1000 liters
| Capacity | Diameter | Height | Filling hole |
| (lt) | (mm) | (mm) | (mm) |
| 60 | 400 | 530 | 110 |
| 120 | 500 | 680 | 200 |
| 220 | 620 | 800 | 200 |
| 300 | 710 | 890 | 200 |
| 500 | 885 | 1000 | 200 |
| 1000 | 1100 | 1200 | 200 |
Material: Polyetylene HD
Color: White
Cap inspecton threaded diam. 110 mm
(for capacity 250-500) threaded diam. 310 mm
Arrangement for threaded drain hole: Ø 1/2" until a 300 litri
Ø 1" for 500-1000 litri
| Capacity | side x side | Heigth |
| (lt) | (mm) | (mm) |
| 60 | 545x395 | 395 |
| 90 | 725x395 | 335 |
| 120 | 880x490 | 300 |
| 250 | 825x615 | 620 |
| 500 | 1000x700 | 800 |
print Accessories for dosing pumps
kompact is a simple solenoid dosing pump, operating with a micro-processor to manage the dosing. It's external enclosure has an IP55, which guarantees a protection versus splashing water and aggressive environments. Kompact pump has a LED, which shows the state of the operation, according the dosing regulation, constant C or proportional P:
Operation state LED:
• Steady green LED switches off with every stroke that the pump runs.
• Flashing Green led with the potentiometer to 0.
• Steady red LED switches on with alarm.
In proportional mode
• Steady orange LED switches off withevery stroke that the pump runs.
• Flashing orange LED with the potentiometer at 0.
MODELS
AMS (constant dosage) - Constant flow rate manually adjustable by control dial on the front panel, Power-ON led indicator.
AML (constant dosage) - Constant flow rate manually adjustable by control dial on the front panel, two flow rate range:
• 0÷20% with switch in P position,
• 0÷100% with switch in C position,
Power-ON led indicator and level control input.
AMM (proportional dosage) - Constant flow rate manually adjustable, proportional flow rate according to an external analogue signal (4÷20 mA), Power-ON led indicator and level control input.
The two different modes are:
n Constant (switch in C position) - The pump constantly doses the rate selected with the potentiometer.
n Proportional (switch in P position) - The pump doses proportionally to the analogue input signal (4÷20 mA).
AMC (proportional dosage) - Constant flow rate manually adjustable, proportional flow rate according to a digital input signal (from water meter), Power-ON led indicator and level control input.
The two different modes are:
n Constant (switch in C position) The pump constantly doses the rate selected with the potentiometer.
n Proportional (switch in P position) The pump doses proportionally to the digital input signal
(Division mode 4 : 1). Maximum input frequency: 80Hz.
Features
|
Enclosure |
Materials: PP |
|
Pump Head materials |
Pump body: PVC [with manual priming valve] Valves: PVC Balls: ceramic Diaphragm: PTFE [the diaphragm has been tested over a period of 5 years] |
|
Power supply |
AMS model: 230 Vac 50 Hz - Consumption 12 W AML / AMM / AMC 100÷240 Vac 50/60 Hz Models [with reduced power consumption as the solenoid only draws the required power to activate the pump, based on the working conditions] - consumption 14 W |
|
Flow rate manual adjustement |
from 0 (operation stop) to 100% of max. flow rat |
|
Wall mounting |
whit fixing brachet |
TEKNA evo
electromagnetic dosing pump
Rational
only 5 models, only PVDF, all functions in one pump.
The evolution of the electromagnetic pumps
- 5 models to meet the needs of dosage from 0.4 to 54 l / h with a maximum pressure of 20 bar.
- 1 housing: it is possible to provide the facilities and select the pump independently the characteristic necessary hydraulic.
- multi-voltage electric power stabilized 100 to 240 Vac 50/60 Hz low absorption
| Models | flow | pressure |
| 500 | 0,4 - 1,5 lt/h | 20 - 6 bar |
| 600 | 2,5 - 7 lt/h | 20 - 8 bar |
| 603 | 4 - 8 lt/h | 12 - 2 bar |
| 800 | 7 - 18 lt/h | 16 - 1 bar |
| 803 | 20 - 110 lt/h | 5 - 0 bar |
- PVDF is suitable for most of the chemicals used in the industrial applications, in the
treatment of water and in water purification.
- The ceramic balls improve the reliability of the assay and the chemical compatibility.
:
- The special design and the production process allow the diaphragm to have an
extraordinary resistance
extraordinary resistance
- Made of pure PTFE, the diaphragm is compatible with all chemicals
- The diaphragm was tested in the field and in the laboratory, for a period of 5 years
with excellent results
with excellent results
- The periodic replacement of the diaphragm is no longer required
- The programming functions are described in full in 5 languages
- Once a function is selected, the pump will only display the parameters related to that specific function
Analogic version
model AKL - constant dosage
Analogue dosing pump with constant flow rate adjustment by knob on the front panel, pulse divider (0 to 20 or 0% to 100%), LED indicator working pump.
model APG - proportional dosage
Analogue dosing pump with constant manual adjustment, digital signal proportional to (counter) or analog signal (4 to 20 mA):
• Adjustment knob (% e "n" value in multiplication)
• Selection button 6 positions:
- three division (1, 4, 10 = n)
- a multiplication (n = 1)
- a proportional (4÷20 mA)
- a constant function
• Selection button 6 positions:
- three division (1, 4, 10 = n)
- a multiplication (n = 1)
- a proportional (4÷20 mA)
- a constant function
• Function “pacing” can be set by dip-switches
model ATL - timer dosage
Analogue dosing pump with constant manual adjustment, and timed dosing with double adjustable T on-T off.
• 3 knobs (flow rate, regulation on T - T setting off)
Digital version
model TPG - proportional dosage
Analogue dosing pump with constant flow rate adjustment by knob on the front panel, pulse divider (0 to 20 or 0% to 100%), LED indicator working pump.
modello TPR - dosaggio proporzionale
Pompa elettromagnetica con strumento di misura pH/Redox.
• Interfaccia digitale a dosaggio costante o proporzionale al valore di pH o Rx misurato
• Ingresso per sonda PT100 (termo compensazione)
• Relay di ripetizione allarme
• Ingresso On-Off (interruttore remoto)
• Uscita 4÷20 mA per ripetizione misura
modello TCK - dosaggio temporizzato
Pompa elettromagnetica a dosaggio costante o temporizzato.
• Relay temporizzato programmabile per contatto libero da tensione
.
The INVICTA Series is a simple and reliable dosing electromagnetic pump based on a microprocessor.
Application areas ideal for its use are: installers, swimming pools, car washes, cooling towers, reverse osmosis systems and many others.
External plastic cover in PP whit protection IP65
protetta da spruzzi d'acqua e da ambienti aggressivi
Operation state LED:
- Flashing when operating
- Flashes slowly when the pump is stopped
- Blink fast in the presence of level alarm
Manual regulation of flow
da 0 (pompa ferma) al 100% della portata massima.
Possibility of level probe
wall mounting
directly on the wall with fixing bracket
Standard electric power 90-265 VAC (20-60 VAC on request)
